▪ CANopen Option Card for G3 Operator Interface Terminals
▪ Configured using Crimson software (version 2.0 or later)
▪ Digitally Isolated CANopen Port
▪ Powered and configured from G3 Operator Interface Terminal
▪ Built-in Termination Resistor
▪ Installation and connection hardware included with card

▪ CANopen Option Card for G3 Operator Interface Terminals
▪ Configured using Crimson software (version 2.0 or later)
▪ Digitally Isolated CANopen Port
▪ Powered and configured from G3 Operator Interface Terminal
▪ Built-in Termination Resistor
▪ Installation and connection hardware included with card

▪ For use with the G3 Series of Operator Interfaces
▪ Protective HMI Overlays for use in Highly Abrasive Environments
▪ Preapplied Low-Tack Adhesive Simplifies Use
▪ 10 Overlays per Package

▪ Configured using Crimson software (version 2.0 or later)
▪ Installs inside a G3 Operator Interface Terminal
▪ Installation and Connection hardware Included with Card

▪ Adds PROFIBUS DP connectivity to any G3 Operator Interface
▪ Powered by the G3 Operator Interface
▪ Installation and Connection Hardware included with Card

▪ RS232/485 Option Card For G3 Operator Interface Terminals only
▪ Configured using Crimson software (version 2.0 or later)
▪ Isolated RS232 and RS485 Multiplexed ports (capable of communicating with RS232, RS422, RS485, and DH485 devices at up to 115,200 baud)
▪ Powered and Configured from G3 Operator Interface Terminal
▪ Installation and connection hardware included with card

▪ CANopen® card for use with Data Station Plus and Enhanced Modular Controller
▪ Configured using Crimson Software (Version 2.0 or later)
▪ Digitally Isolated CANopen® Port Capable of Communicating with any CANopen Device
▪ Easy Installation

▪ Configured using Crimson software (version 2.0 or later)
▪ Digitally Isolated DeviceNet Port capable of communicating with any DeviceNet master
▪ Easy Installation

▪ For use with Data Station Plus and Modular Controller
▪ Configured using Crimson Software
▪ Installs Inside a Data Station Plus or a Modular Controller
▪ Installation and Connection Hardware are included with Card

▪ Adds PROFIBUS DP Connectivity to the Data Station Plus and Modular Controller Series
▪ PROFIBUS DP Slave Protocol
▪ Easy Installation

▪ For use with Data Station Plus and Enhanced Modular Controller (will add additional serial capability)
▪ Configured using Crimson Software (Version 2.0 or later)
▪ Isolated RS232 and RS485 Multiplexed Ports Capable of Communicating with RS232, RS422, RS485 and DH485 Devices at up to 115,200 Baud
▪ Easy Installation